Archive for April, 2015

Stump Removal: Tips, Techniques and Methods on How to Remove a Tree Stump Yourself

“When you’ve had tress removed in your backyard, do not expect that the large or stubborn trunks are also removed. You will usually be left with a trump that is not just eyesore but space consuming. If you have stumps in your backyard, check out the steps below to properly and completely remove them.”

 

Although cutting down a tree may seem like a major project, it’s actually straightforward when compared with removing a stump. Stump removal is a lot more involved, which is why it’s not usually included in the cost of tree removal. It’s also why many people have old stumps in their yards. Stump removal isn’t easy, but it is doable. You’ll get the job done more quickly and easily when you use the right techniques and methods, and there are a handful of viable options available.

Reasons to Remove a Stump

After going through the trouble to have a tree removed, it doesn’t make a lot of sense to leave the stump sitting there. A few of the top reasons to remove stumps from your yard include:

  • They are Eyesores – No one likes gazing out into the yard and seeing old stumps dotting the landscape. They look even worse when weeds and other plants start growing on them, which inevitably happens over time.
  • They Take Up Valuable Space – Most people want the widest, clearest yards possible, and stumps really get in the way.
  • They are Hazardous – Some stumps are obvious, but others get camouflaged by grass, weeds and other plants and become tripping hazards. Nothing is worse than stubbing your toe on an old tree stump.

 

Assessing a Tree Stump

assessing a tree stump

(c) http://www.treeremoval.com

Some stumps are easier to remove than others and therefore different techniques can be applied. Being prepared ahead of time and knowing which techniques and methods to use for which type of job will make things much easier for you in the long run. For example, pine tree stumps tend to be easier to remove than stumps from deciduous trees. The roots of pine trees tend to be wide, flat and relatively shallow while deciduous tree stumps’ roots tend to be long and deep.

What makes a stump easier to remove? Generally, the age and size of the tree are the best indicators of stump removal difficulty. Simply put, the older a stump is, the easier it is to remove. Likewise, small stumps are also easier to remove than large ones. Another good thing to keep in mind before choosing a stump removal method is to consider the total number of stumps that need to be removed. Do you really want to remove 100 stumps by hand? Or even 3? This guide will help you decide which stump removal techniques and methods are appropriate for you.

 

Removing a Stump by Grinding it Away Yourself

Stump Grinding

(c) http://www.treeremoval.com

If removing a stump manually won’t work and you’d like to get rid of your stump (or stumps) quickly, you can always rent a grinder and grind the stump away yourself. These heavy-duty machines weigh around 1,000 pounds, and you can expect to pay between $100 and $200 to rent one for a single day (see our guide to Stump Grinding Prices & Costs) . Therefore, it only makes financial sense to do the job yourself when there are several stumps to remove.

In addition to the grinder, you will need a shovel, a mattock, a chainsaw and a rake.

  1. Use a shovel or mattock to clear rocks away from around the stump.
  2. Cut away as much of the stump as possible with a chainsaw. Try to get it as level to the ground as possible.
  3. Using the hydraulic lever, raise the grinder wheel a couple of inches above the stump. After turning it on, lower it about 3 inches into the stump. Move it side to side with the lever.
  4. After grinding down to about 4 inches with the grinder wheel, move it forward. Repeat the process until the entire stump is at least 4 inches below ground.

Keep in mind that a stump grinder is a dangerous piece of equipment and that you should always wear protective gear. Be especially diligent about wearing protective …

 

Read more: http://www.treeremoval.com/stump-removal/#.VUHT9fB6bVY

Wood Flooring Guide

http://www.crawfordtiles.com/wp-content/uploads/2014/02/cheap-wooden-floors-Ireland.jpg

(c) http://www.crawfordtiles.com

 

At present, everyone is after switching to wood flooring as it’s not just durable but it additionally look classy on houses. Wood flooring is produced in many different materials, and each has their own look, this means you are going to be laid out with a lot of choices in the market. Provided that you’ve got a great deal of choices for wood flooring, let us examine first on the 3 common types for this type of flooring.

•    Engineered Wood Flooring

Wood flooring has long been quite popular. Wooden flooring has a formal, beautiful and warm appearance that is certainly suitable for all kinds of rooms. Engineered wood flooring are made from layers of wood that are pushed and glued together. Each layer is piled on the other in a cross-grain setting and then pressed using heat and pressure. The thickness on this type of wood will vary. Three- and five-ply flooring is one of common engineered wood flooring. However it is more costly in comparison with laminates yet cheaper as compared to solid wood flooring.

•    Laminate Floors

This kind of wood flooring is a totally artificial product. Its inner core is often made out of melamine resin and fiberboard. On top there exists a type of photographic overlay that simulates the appearance of solid wood. The thickness and sturdiness of the top coat may help determine the caliber of the laminate. You can find weak or cheap laminates which do not wear well and fail within a several years. There are some commercial grade laminates that are incredibly sturdy, challenging to scratch or gouge and last years of rough wear. A few of the more robust laminates are harder than wood and much less susceptible to scratching, excellent in case you have big dogs whose nails will often scratch natural wood floors. Laminate flooring are less costly than genuine wood flooring and also involves less installation time when compared to other kinds of wooden flooring.

•    Solid Hardwood Flooring

Solid hardwood floorings are classified into three categories: parquet, plank and strip. Solid is milled from just one 3/4″ thick piece of hardwood: 3/4″ thick plank which is in narrow 2 1/4″ strips. This is actually the classic strip wood floor yet the solid wood floors could be manufactured in many different widths and thicknesses. The most popular hardwood species put to use for solid wood floors are red oak, white oak, ash and maple. They are very easy to clean up maintaining your floor free from grit and dirt because they can make your floor full of nicks and scratches..

– Making the final decision
How do you pick out appropriate flooring for your house? There are numerous things to consider while picking flooring for your house particularly if you have made the decision to use wood. Is it appropriate for the home? Can I afford it and its maintenance? Will it be long lasting?

Dummy Cameras: The Answer to Less Costly Protection

Crime rates have been drastically increasing. Wherever you go, almost nothing appears to be risk-free anymore. That’s why many more people are securing their houses and having precautionary and security measures to make certain that their homes are very well secured and safe. More than ever before, a lot more people are using surveillance cameras to secure their properties, office and business. Having said that, it’s possible to spend less and maintenance time with the addition of a fake security camera to your home security system. However some people make an effort to save much more money by making use of only fake cameras, it is usually advisable to use them together with your regular security cameras. This can substantially lower the overall cost of your security system, as you don’t need to spend lots of money on multiple cameras.

http://img.bhs4.com/b4/9/b49ff1d4116d61b952a955f7857498c9249f3f32_large.jpg

Photo from www.brighthub.com

a)    No criminal would want to present their identity to the people given the fact that they’re carrying out unlawful thing. That’s why thieves look first on the setting of their home target. Once they knew that a home or a business has surveillance camera (not knowing if it’s fake) will definitely drive them off.

b)    A camera is a sure way to get caught and end in jail. So, a fake security camera minimizes petty crimes. The uncertainty of real and fake camera is going to be sufficient to help your house become less of a target. This can be a wiser approach instead of not having at all or shelling out for very expensive items.

c)    The key reason why a fake camera operates so well is it appears much like the real thing. It should be extremely hard for a prospective thief to see should the system is real or not. This way, she or he will likely not want to take the risk of committing a crime in front of it.

d)    The first outlay for fake cameras is much less than that of their actual counterparts. Additionally, upkeep expenses for a fake camera are negligible in comparison to that of the genuine surveillance cameras.

Ultimately, fake security cameras provide practically the same level of protection that real ones can. They’re not going to have the ability to play a video recording of a crime, of course, and so they do lose some advantage in that regard. However, they will be entirely effective should they keep the crime from ever occurring. In case there are no criminals willing to visit your home or business, you won’t need to have a video recording of what they were doing. A fake camera keeps your belongings secure without having to spend much cash.

10 Tips for Spray Painting Your Wood Furniture

“Brush painting can be a little challenger if you are only thing painting on your own. It can have marks or even drips which results to an undesirable result. If you want another option, you can try spray painting as it results to a more smooth finish to a furniture. You don’t have to be an expert. As long as you know the basics, then your good to go.”

 

(c) http://www.doityourself.com

Spray painting is an easy way of achieving a smooth, even finish on wood furniture. This is especially true of items that have intricate designs. Whereas painting with a brush can result in drips and brush marks, spray paint can bring you a near perfect look. Like all other materials, wood requires some preparatory steps before the application of spray paint.

TIP: Doityourself’s painting consultant Edward Kimble, author of Interior House Painting Blog, adds, “If the wood has a waxed polyurethane or shellac or lacquer finish, it will not accept paint until the existing finish is removed. However, there are some chemicals sold that can remove the wax and prepare the furniture to accept paint. Check at the paint store. Lightly sanding may help, but it may not.”

Choose Appropriate Furniture

When you spray paint your wood furniture, keep in mind to avoid upholstery. If you are painting outdoor furniture, choose paint with a high degree of moisture resistance and sun protection. Avoid painting antique furniture, because it may lose its value.

 Remove all Hardware

Depending on the type of furniture you are painting, you may have to unscrew and remove some of the components. On cabinets and drawers, remove the knobs and handles beforehand. Remove any drawers as well. Paint all these objects separately and reassemble the furniture when all the parts are dry.

Cover Surrounding Area and Objects

Because spray paint consists of minute particles that can settle on surrounding surfaces, it is important to protect them beforehand. Cover all surrounding objects and the floor with newspapers, drop clothes or masking tape.

Sand the Surface Beforehand

Before spray painting your wood furniture, sand it thoroughly to remove all the rough edges. Start with rough sandpaper and then repeat with a finer version to achieve a smooth texture.

Clean Thoroughly without Wetting the Furniture

After you sand your piece, clean it thoroughly and remove all the sawdust. Use a soft cloth for this purpose. Avoid using water, because it will penetrate the wood and cause damage. Use a vacuum cleaner to thoroughly clean the surrounding …

 

Read more: http://www.doityourself.com/stry/10-tips-for-spray-painting-your-wood-furniture

Understanding Common Plumbing Sounds

Sounds in your plumbing could be scary. Not because you think your house is haunted, but because lots of people are as scared of their specialist because they’re their dentist. It really is unfortunate that plumbers have this nasty reputation since there certainly are a lot of great plumbers available and at some time, your plumbing system is going to make noises. A few of these are potentially serious issues and some are not really a big deal. But before you’ll be able to be aware of the possible impact of whatever is causing the noises, it’s important to determine just what is causing the noise in the first place. Let’s take a short look at three of the most common noises – hissing, rattling, screeching – and also the reason for each. Do not forget that not every noise is because the same problem and a plumbing breakdown can ruin a house. So a skilled plumber is always advised.

http://cdn.kewforestplumbing.com/wp-content/uploads/plumbing-nyc-gurgling-pipes-589x409.jpg

(c) www.kewforestplumbing.com

Hissing Sounds – A hissing sound is one of the more usual noises a person could come across in their home. This will occur sometimes when you switch on a faucet. The reason for this noise generally is a water pressure which is too much. The solution is to install a valve that will decrease the water pressure and be free from of this noise.

Chattering or Screeching – Intense chattering or screeching that happen when a valve or faucet is turned on, which generally vanishes in the event the fitting is opened up fully, signals loose or defective interiors. The solution is to switch the valve or faucet with a brand new one. Pumps and appliances just like washing machines and dishwashers can transfer motor sound to pipes if they’re inaccurately connected. Link such items to plumbing with plastic or rubber hoses-never rigid pipe-to identify them.

Rattling Pipe Sound – When you are running a tap, flushing a toilet, or making use of water by any means, a rattling takes place. Generally, this simply means a pipe has busted – or loosened – its mounting strap. It’s really a relatively simple repair provided you don’t need to go through a wall, and worth it to stop problems for the pipe. If they’re accessible (as in a basement or crawlspace), set up additional clamps to fasten them firmly to the joists.

There are several noise that can emanate out of your plumbing system. These are generally 3 common ones however there are many more and dependent on where noise is coming from and the type of noise, as they can signal a major problem or a simple repair. If you’re not sure of what are the cause is, a specialist needs to be consulted. You don’t want to take a chance with your plumbing because the impact of a busted pipe on your home and the resulting cleanup effort is usually vital.

15 Homemade Organic Gardening Sprays and Concoctions That Actually Work

“A lot of gardeners especially those who have dedicated most of their life in gardening have discovered a lot of things that can help them in so many ways. One great example is creating natural pesticides, fungicides or other concoctions that not just lessen their expenditure but also deals with small to serious issues in the garden.”

 

Back when I started my first garden, a certain celebrity gardener and his books of gardening concoctions were all the rage. You could tell when it was fundraising time on our local PBS station because they’d have him live in the studio, telling us that all we had to do was use items such as baby shampoo, instant tea, and whiskey, and we’d be able to grow our best garden ever. Those claims seemed pretty far-fetched to me back then, and now that I know a little more, I know that several of those concoctions were either just plain bad ideas or that one item in his recipe was the one that was actually doing the work while the rest were either unnecessary or possibly harmful to plants, insects and other soil-dwelling organisms. So please know that my b.s. radar is at high alert when I see anything about homemade gardening sprays and the like. With that in mind, here are 15 homemade, organic solutions for garden problems. I use them, and they work. And not one of them requires you to pour whiskey on your plants.

Pest Control

1. Tomato Leaf Spray is effective in killing aphids and mites. It works because the alkaloids in the tomato leaves (and the leaves of all nightshades, actually) are fatal to many insects.

2. Garlic Oil Spray is a great, safe insect repellent. Simply put three to four cloves of minced garlic into two teaspoons of mineral oil. Let the mixture sit overnight, and then strain the garlic out of the oil. Add the oil to one pint of water, and add a teaspoon of biodegradable dish soap. Store in a bottle or jar, and dilute the mixture when you use it by adding two tablespoons of your garlic oil mixture to one pint of water.

This mixture works because the compounds in garlic (namely, diallyl disulfide and diallyl trisulfide) are irritating or deadly to many insects. The oil and soap help the mixture stick to plant leaves. What insects does garlic oil repel? Whiteflies, aphids, and most beetles will avoid plants sprayed with garlic oil. A word of caution: don’t apply this spray on a sunny day, because the oils can cause foliage to burn.

3. Hot Pepper Spray is a great solution if you have problems with mites. Simply mix two tablespoons of hot pepper sauce, a few drops of biodegradable dish soap, and one quart of water and let it sit overnight. Use a spray bottle to apply the spray to infested plants.

Hot pepper spray works because the compound capsaicin, which causes the “heat” in hot peppers, is just as irritating to insects as it is to us (have you ever sliced a hot pepper and gotten any of it in an open cut? Ouch!) This mixture also helps repel whiteflies, but it may have to be reapplied if you start to see the mites or whiteflies returning.

4. Simple Soap Spray is useful in taking out a wide variety of garden pests, including aphids, scale, mites, and thrips. Just add one tablespoon of …

 

Read more: http://home.howstuffworks.com/green-living/homemade-organic-gardening-sprays.htm

Freshen Up Your Home With Air Purifiers

Are you searching for an Air Purifier for your home? It can help to know the 5 most typical types so you’re able to make an informed choice.

http://uappliances.com/wp-content/uploads/2013/01/What-Does-a-Whole-Home-Air-Purifier-Do.jpg

(c) http://uappliances.com

a)    Carbon Air Purifiers – Carbon Air Purifiers are highly effective with gas, smokes and odors, yet not as efficient with allergens, dust, and bacteria. Carbon air filters are comprised of microscopic remarkably absorbent pores. They chemically react to the particles that go through them. Bigger particles are caught in the several pores.

b)    UV Light Purifiier- This is basically a sterilization method using ultra-violet light. The UV light has to be at the right wavelength which the best is 254 nanometers. At this wavelength the UV irradiation breaks the molecular bonds within DNA of organisms like bacteria and viruses. This ruins them or renders them harmless. Additionally, it kills fungal spores and mold spores.

c)    Ozone air purifiers – Should the term ozone air purifier is utilized, it really is generally conveying an air cleaner that can cause ozone to sterilize the air or stuff inside a room. Ozone air purifiers discharge ozone (O3) into the air. This reactive oxidant works well against chemical smoke, smells and microorganisms but can’t remove particles along with other allergens. Even so, excess ozone may lead to the development of new pollutants and therefore these purifiers should be used very carefully.

d)    Hepa Filter Air Purifiers – Filter based air purifiers function by “filtering” particles and allergens by size. Air is pressed from a fan via the filter and this one draws in small particles. The standard air purifiers use the application of cloth type filter to split up out the dust particles. HEPA or High-Efficiency Particulate Arresting filters tend to be the finest filters and can trap 99% of the particles that happen to be 0.3 micros or larger in size. This device usually comes with a replaceable filter. Although a HEPA purifier can trap most suspended particles, it is ineffective against chemical fumes, odors and gases. Air purifiers that make use of filters are great at capturing allergens; yet don’t have the capability to trap smaller particles, like chemical gases, odors, smoke, etc.

e)    Ionic air purifiers – Ionic air purifiers create charged particles (ions) and emit them in to the surrounding air. These ions combine with harmful particles (like dust) in the air, driving the impurities to hang on to a close surface. Ion generators are the second most popular type of air purifiers, but they both emit ozone, a strong lung stimulant that is especially dangerous for those who have asthma and other chronic lung diseases, both children, and the seniors.

Tend not to live in a world in which the only filter you’ve got from pollution is your lungs! Purifiers for your property are worth every dollar.

The Best Insulation For Your Home

http://www.lifeofanarchitect.com/wp-content/uploads/2011/07/loaa-3-insulation-spray-foam-roofline-energy-vanguard.jpg

Image courtesy of http://www.lifeofanarchitect.com

 

It’s a usual misunderstanding that insulation is simply to keep warm air in and cold air out of a property. This may not be true, it is also just as essential in reverse. Insulation will help keep your home’s temperature down in the summertime which helps on your energy bills. Your air conditioner do not need to work as hard in a well-insulated home.

When selecting insulation, remember that the larger the R value, the better it is at conserving energy and helping make your home comfy. You can choose from many different insulation types, based on your requirements and what you would like to pay. One of the great things about having chosen the proper material would be a home that is appropriately insulated and efficient in terms of heat and consumption.

You can find 4 varieties of insulation you must know about whenever thinking about your home;

A. Loose-Fill Insulation: Loose-Fill is either blown or poured into an area of a home, often put to use in closed spaces similar to attics, ceilings, walls and floors. Loose-Fill insulation is available in a number of materials just like fiberglass, rock wool and cellulose.

B. Fiberglass Insulation: It is the most common type present in homes all across the nation. It’s often bought in large rolls called batts, and its R-value is about 3.2 per inch. These are typically made use of in between floor joists as well as within wall cavities. You will find safety hazards when making use of this sort of insulation. Be sure you wear a dust mask or a respirator so that you don’t breathe in any of the dust. Furthermore, put on long sleeves and gloves to safeguard your skin.

C. Rigid foam Insulation: This sort is among the most high-priced of all insulation materials yet the best because it has the highest tolerance for moisture. Whilst typically more costly than fiber products, it is very effective in buildings with space limitations and where higher R-values are needed. It is usually used in unfinished walls; ceilings and floors; and un-vented low-slope roofs.

D. Foam Insulation: Foam is also used to insulate closed spaces like walls, ceilings and floors. Once the foam is inserted into an empty space it will expand and harden to offer excellent R-values. Foam is among the most expensive form of insulation and you will then ought to hire a professional if you are looking to insulate a large area.

25 Cool and Unusual Clocks

“Time is gold. That is why we need our watches, clocks or cellphone to monitor our precious time. But nowadays, keeping us on our busy schedule is no longer as simple and plain like what it used to. Today, uniquely designed clocks are incorporated in every home combing functionality and aesthetics in creative way.”

 

A clock is one of the oldest human inventions, and besides telling the exact time it often serves as an important wall-decorating accessory.

Classical design of a clock is already iconic, and you probably rarely see anything different than that. That’s why we want to shake things up a bit, and show you these 25 unusual and creative clock designs. [Read more…]

1. Turntable Clock

This clock was created using a recycled Sanyo turntable and a Ronco’s Greatest Hits album titled “Get It On” which is replaceable. (Designed by pixelthis)

2. RND Time

The most unusual feature of this clock lies in its entirely random application to the wall, hence the name “rnd_time”, where “rnd” is used to indicate the random factor. (Designed by progetti)

3. Pop Quiz Clock

Think back to a time when you were a young geek. Sure, you were brilliant at math, but being asked to solve problems on the chalkboard… That’s the stuff of nightmares. Thankfully, that time is over… Or is it? The smell of chalk, and the feel of the blackboard is still fresh in your mind. If you close your eyes, you can almost feel the eyes staring at your back as you labor to engage your brain and simplify the polynomial. (link)

4. Clock Made From A Recycled Bike Wheel

This clock was made from a recycled aluminum Mongoose bike wheel. The wheel mounts directly to the wall through the hub using a hollow wall anchor and gives the illusion that it is floating off the wall. The clock movement is a high torque German quartz movement and is attached to a set of rear cassette gears to conceal the movement. (Designed by pixelthis)

 

Read more: http://www.boredpanda.com/cool-and-creative-clocks/

 

 

Leather Furniture Restoration: 4 Considerations

Leather furniture is among the most elegant improvements we could make in the property interior. It could possibly come in many forms and measurements, from a king-size leather bed to a soft and homey leather chaise-lounge. Of those that have leather furnishings can testify that leather is amongst the most resilient materials a furniture could be made of. Here are a few considerations when you want to properly sustain your leather furniture,

i.    Cleaning furniture

You need to routinely wipe leather furnishings carefully. Wiping your leather room furniture with a clean, damp cloth is really important so that the dust will not accumulate overtime..

In the event that you drip liquid in it, blot the stains by using a soft, dry cloth soon after. For sealed leather sofa, clean it with a mild soap and water solution. Then dry it with a soft, clean cloth. You might also utilize a vacuum to take the debris and dust from your furniture. Compared with most other furnishing, leather demands a little extra care and needless to say, a fair distance from flaming heat and sharp edges.

http://www.designwagen.com/pictures/2010/05/Modern-Leather-Sofas-Furniture-Design-Carezza-Hong-Kong-Griffith.jpg

(c) http://www.designwagen.com

ii.    Placement of Furniture

Prolonged exposure to heat damages the material’s strength causing it to wear down faster. Therefore, leather furniture should not be kept in direct sunlight. Sunlight is naturally a bleaching agent. Virtually any natural substance is going to be badly affected by the sun. Furthermore, it shouldn’t be positioned near a fireplace. The explanation behind this is that heat will damage the leather.

iii.    Types of Leather

Non-fabric furniture can be produced with pigmented, suede or dyed leather. As a way to clean this kind of furniture, be aware of type of material first just before using cleaners or conditioners. A suede couch will require special care and cleaning by a professional. The normal leather couch has a sleek water-proof surface area and has been given a protective conditioning treatment just before acquisition.

iv.    Conditioning

As soon as the leather is dry, it’s time to utilize a leather conditioner. A conditioner won’t extend the life of the leather, but also restore some of the color that may have faded and add some extra protection against fading and aging due to the results of the things. The key purpose of using a conditioner after leather cleaning is always to restore it to its former glory, but it may also be used after stains are cleaned. Leather couch conditioner could sort out dry and dull spots rapidly which usually occurs after cleaning.

Making certain that leather furnishings stays supple and soft for many years is not a difficult task. Easy cleaning and conditioning can keep the leather restored and looking as wonderful as it did when first acquired. Real leather furniture is a sophisticated, resilient and comfortable addition to any room. Keeping leather furniture clean and conditioned will improve its look as ages go by and help to maintain its value.