Faucet Problems – How to Fix a Leaky Faucet

Many of us have probably experienced this, a leaky faucet in the middle of the night that completely disturbs our sleep. Realizing that there is a leaky faucet won’t only keep you awake because of the annoying sound, but will also trouble you, realizing that if this continues, your bathroom may be flooded the next day.

In this post, I will give you a set of ways to be able to fix a leaky faucet in your bathroom. This really is simplified that anybody can actually do it without resorting to a plumber. One basically needs to look at the worn out rubber washer or the O-ring. Both of these things, whenever worn out are the reason why faucets leak and require some attention.

Before you start, check your faucet first. A lot of people forget about this. Determine whether it is a compression faucet, having 2 handles for hot and cold or if there are just one (non-compression faucet). The following information below is intended for non-compression faucet.

(C) www.kapitu.net

A. Turn off the water supply to your faucet. Yet, before you turn off the water supply, it is essential that you perform a comprehensive study of your faucet to establish the source of water leaks. This may allow you to figure out the parts that could need replacement.

B. Disassemble the faucet by prying off the handle. When you still have the drawing s available you can examine to ensure that you are correctly removing it. You should utilize screws to do this.

C. Loosen the packing nut by turning it counter clockwise. (The packing nut can be seen just below or inside the faucet handles. When you’ve got designer faucet handles, you will first need to take out the designer cover.) Take out the whole valve unit, using the faucet handle, by twisting and turning it until it pulls free.

D. You should locate the old washer. It’s going to be at the bottom of the valve unit. After you have found it, remove the screw that’s holding it in position. The washer is usually the culprit in the leaking issue. If you have the part available, then you can easily change it. However, if not, you have to bring the part on the nearest hardware store and inquire the salesman for right substitute.

E. Start off putting things together. Put all things in place, based on the opposite order of how you took it apart. After, place the handle to its post and screw it on. If you screw it on, make sure that you do not screw it in too tight so that you won’t damage the brass fittings. Just keep it hand-tight.

If there’s still a leak, take the leaky faucet apart and re-tighten each part, and when still it doesn’t work, simply call a plumber. Normally, it is simple to fix a dripping bathtub faucet, but if the task at hand becomes too overwhelming, understand that you can find industry experts waiting with a hands-free means to fix the leaky bathtub faucet.

Leave a Reply